How to Copy and Paste a Whole ShortPoint Web Part into Another SharePoint Page

TL;DR: You can copy a whole ShortPoint web part and paste it into another SharePoint page. Copy it with the Copy Web Part icon in ShortPoint Page Builder, or add ?spcopy=1 to the page URL and click Copy. Then open Page Builder on the other page, right-click, and choose a paste option.


Spent hours building the perfect SharePoint page and need another one just like it? You don't have to start from scratch. You can copy a whole ShortPoint web part, with all of its Design Elements, content, and settings, and paste it into another SharePoint page in a few clicks. This article shows you how.


TABLE OF CONTENTS


Prerequisites

  • You have the latest version of ShortPoint SPFx installed on your SharePoint environment.
  • You are a ShortPoint Designer with an active license.
  • You have a SharePoint page with an existing ShortPoint web part that you want to copy.

Ways to Copy and Paste a ShortPoint Web Part


When you copy a ShortPoint web part, you copy everything inside it: every Section, Row, Column, and Design Element, along with their content, design settings, and connections. When you paste it into another page, you get an exact copy that you can edit right away.


There are two ways to copy a whole ShortPoint web part. Choose the one that suits you:


Option 1: Copy Web Part icon


Copy the web part from inside ShortPoint Page Builder by clicking the Copy Web Part icon on the Action Toolbar. This option works best when you're already editing the page.


Option 1 page view with the Copy Web Part icon outlined on the Action Toolbar


Option 2: ?spcopy=1


Copy the web part straight from the published page, with no editing needed. Add ?spcopy=1 to the end of the page URL, then hover over the web part and click Copy. This option is a quick way to copy from any page.


Option 2 page view with ?spcopy=1 added and the Copy button shown on hover


On the other hand, there is one way to paste a copied web part. You can open the ShortPoint Page Builder on the page where you want the web part, right-click, and choose Paste Page Before Section or Paste Page After Section.


Full Page Builder view with the right-click menu listing both paste options


Note: If your page has more than one ShortPoint web part, copy and paste them one at a time.


Tip: Only need part of a page, like one Section or a single Design Element? See How to Use ?spcopy=1 to Copy and Paste Individual Design Elements instead.

Step-by-step Tutorial


The steps are divided into two parts. First, copy the web part from your original page. Then, paste it into another page.


Part 1: Copy the ShortPoint Web Part


There are two ways to copy a ShortPoint web part. Choose the option that suits you.


Option 1: Using the Copy Web Part Icon


Recommended if you're already editing the ShortPoint web part


Step 1: Open ShortPoint Page Builder


Note: If you're already editing the page, skip to step 2.
  • Go to the SharePoint page you want to copy and click Edit.


Clicking Edit on the original SharePoint page you want to copy


  • Close the SharePoint Toolbox by clicking the X icon.


Closing the Toolbox panel with the X icon to see the whole page


  • Click the Edit web part icon on the ShortPoint web part toolbar. This opens ShortPoint Page Builder.


Edit web part icon that opens ShortPoint Page Builder for the web part


Step 2: Copy the Web Part


  • Click the Copy Web Part icon on the Action Toolbar at the bottom of the page.


Clicking the Copy Web Part icon on the Action Toolbar at the bottom


  • You'll see a green Done! notification that says the web part content has been copied.


Green Done notification confirming the web part content has been copied


That's it! You've copied the ShortPoint web part. You can now paste it into another SharePoint page.


Option 2: Using ?spcopy=1


Recommended if you just opened the page and want to copy the ShortPoint web part.


Step 1: Add ?spcopy=1 to Your Page URL


  • Go to the SharePoint page you want to copy. Add ?spcopy=1 at the end of the page URL in your browser's address bar and press Enter.


Adding ?spcopy=1 to the end of the page address in the browser bar


  • You'll see a black banner at the top of your page. This lets you copy the ShortPoint web part.


Black copy banner appearing across the top of the page after the URL change


Note: Leave Allow to copy parts turned off to copy the whole web part. Turning it on lets you copy individual Design Elements instead. Learn more in How to Use ?spcopy=1 to Copy and Paste Individual Design Elements.

Step 2: Copy the Web Part


  • Hover over the web part and click Copy.


Hovering over the web part and clicking the Copy button that appears


  • The button changes to Copied to confirm the web part is copied.


Copied label confirming the whole web part is ready to paste elsewhere


Great! You've copied the ShortPoint web part. You can now paste it into another SharePoint page.


Part 2: Paste the ShortPoint Web Part into Another Page


In this example, we create a brand-new page and add the web part to it.

Note: Want to paste into a page you already have? Go to that page, click Edit, open the ShortPoint web part, and skip to Step 4.

Step 1: Create a New SharePoint Page


  • On your SharePoint site, click New.


Clicking New on the SharePoint command bar to start a new page


  • Select Page from the drop-down.


Selecting Page from the New drop-down list on the SharePoint site


  • Click Create blank to open a blank page.


Clicking Create blank in the Template gallery to open an empty page


  • Close the Toolbox by clicking the X icon.


Closing the Toolbox on the new blank page with the X icon


  • Remove the default SharePoint web parts and Sections. Select each one and click its trash icon until the page is empty.


Clicking the Delete web part trash icon to remove the default banner


Step 2: Name Your Page


  • Click Page at the top left to rename it.


Clicking the Page label at the top left to rename the new page


  • Type the name of your page in the Name field. Then, click anywhere outside the dialog box.


Typing HR Department Page into the Name field of the page details


Step 3: Add the ShortPoint Web Part


  • Click the blue plus (+) icon to add a new SharePoint Section.


Clicking the blue plus icon to add a new Section to the page


  • Select Full-width section.


Choosing the Full-width section layout from the Section options menu


  • Click ShortPoint. This adds the ShortPoint web part and opens ShortPoint Page Builder.


Adding the ShortPoint web part to the new full-width Section


Step 4: Paste the Copied Web Part


  • Right-click anywhere on your page and select a paste option:
      1. Paste Page Before Section adds the copied web part content above the selected Section.
      2. Paste Page After Section adds the copied web part content below the selected Section.


Right-click menu showing the Paste Page Before and After Section options


Awesome! The copied web part now appears on your new page. You can edit it however you like.


Copied hero banner pasted onto the new page and ready to edit


Step 5: Save and Publish


  • Once you're happy with your changes, click Save.


Clicking Save in ShortPoint Page Builder to keep the pasted content


  • Click Publish page.


Clicking Publish page so visitors can see the new SharePoint page


Congratulations! You've pasted a whole ShortPoint web part into another SharePoint page.


Published HR Department page with the Page published message at the bottom


Frequently Asked Questions


What gets copied when I copy a whole ShortPoint web part?


Everything inside the web part: all Sections, Rows, Columns, and Design Elements, plus their content, design settings, and connections. The pasted copy looks and works the same as the original, and you can edit it without changing the original page.


Which copy option should I use?


Use the Copy Web Part icon (Option 1) when you're already editing the page in ShortPoint Page Builder. Use ?spcopy=1 (Option 2) when you want to copy straight from a published page without opening the editor.


My page has more than one ShortPoint web part. Can I copy them all at once?


No. Each ShortPoint web part is copied separately. Copy and paste the first one, then go back and repeat the steps for the next one.


Can I paste the web part into a page on a different SharePoint site?


Yes. As long as ShortPoint is installed on the other site and you're a ShortPoint Designer there, you can paste the web part into any page you can edit.


Do I have to create a new page to paste the web part?


No. You can paste into an existing page too. Go to the page, click Edit, open the ShortPoint web part in Page Builder, right-click, and choose a paste option.


Can I use Ctrl + V (Cmd + V on Mac) to paste?


No. Keyboard shortcuts don't paste ShortPoint content. Right-click inside ShortPoint Page Builder and choose a paste option instead.


Why don't I see the paste options when I right-click?


Make sure you've copied the web part first, and that you're right-clicking inside ShortPoint Page Builder, not on the regular SharePoint page.


Can I copy only part of the page instead of the whole web part?


Yes. You can copy single Sections or Design Elements with the Copy option on their EasyPass tag, or with ?spcopy=1 and the Allow to copy parts toggle. See How to Use ?spcopy=1 to Copy and Paste Individual Design Elements.


Related articles:

Did you find it helpful? Yes No

Send feedback
Sorry we couldn't be helpful. Help us improve this article with your feedback.
Free Trial

Try ShortPoint, free for 15 days.

No credit card. Full feature access.

Start Free Trial
Academy

Master ShortPoint, step by step.

Learn ShortPoint in minutes.

Explore Courses
See all 21 topics

Start a trial

Ignite your vision. Install ShortPoint directly on your site, or play in sandbox mode. No credit card required.

Get started today

World’s best intranet sites are designed using ShortPoint

Thousands of companies using ShortPoint everyday to design, brand and build award winning intranet sites.

Get started Learn more